What BPM Is Each Music Genre?
Genre BPM ranges are reference bands for comparing tempo across musical styles. This site uses approximate ranges such as 120 to 130 BPM for house and 160 to 180 for drum and bass. Ranges overlap, so weigh tempo alongside drum patterns, instrumentation and phrasing when choosing or describing a genre.
Every range here is this site's rough guide, and other references publish different bands for the same styles. The starting tempos are practical suggestions, not measured catalog peaks. The rhythm column names one example to explore in each guide, not a rule for every track.
| Genre | Approximate site range (BPM) | Suggested starting BPM | Rhythm or style example |
|---|---|---|---|
| R&B slow jams and neo soul | 60 to 90 | 70 to 80 | Slow jam pocket |
| Hip hop | 80 to 115 | 88 to 94 | Boom bap backbeat |
| Reggaeton | 88 to 100 | 94 | Dembow rhythm |
| Pop | 90 to 130 | 100 to 120 | Pop drum arrangement |
| Afrobeats | 95 to 115 | 100 to 106 | Layered percussion groove |
| Rock | 100 to 150 | 110 to 140 | Driving backbeat |
| House | 120 to 130 | 124 to 126 | Four on the floor kick |
| Techno | 125 to 150 | 128 to 132 | Repeating electronic groove |
| Trap | 130 to 160; slower pulse 65 to 80 | 140 | Half time drums |
| Dubstep | 138 to 145; slower pulse about 70 | 140 | Half time drop |
| Drum and bass | 160 to 180 | 174 | Breakbeat pattern |
For comparison, Ableton Learning Music lists hip hop at 60 to 100 BPM, house at 115 to 130 and techno/trance at 120 to 140. The gap between their hip hop band and ours shows how much a reference depends on the source and on which substyles it folds in. The hip hop guide also covers lo fi examples below this site's headline band.
Which Genre Guide Should You Open?
Open the guide for the style you are producing, mixing or practicing. Each one goes deeper than this table: substyle tempo references, a drum pattern you can program, production notes and tempo questions specific to that genre. The list below groups them by how they are usually counted, so you can find neighbors quickly.
Slower and mid tempo grooves:
- R&B slow jams and neo soul BPM: the slower reference band and its pocket, with groove examples.
- Hip hop BPM: boom bap against other hip hop tempo and groove choices.
- Reggaeton BPM: a dembow pattern and tempo choices inside the site band.
- Afrobeats BPM: percussion layers, groove and crossover examples.
Songs and bands:
- Pop BPM: tempo choices across pop examples, without treating one range as a boundary.
- Rock BPM: backbeat patterns and starting tempos for contrasting rock styles.
Club tempos with a steady kick:
- House music BPM: substyle references and a four on the floor groove with offbeat hi hats.
- Techno BPM: melodic, hypnotic and harder examples, straight and swung.
Fast grids with a half time feel or breakbeats:
- Trap BPM: the production grid, the slower pulse and where the backbeat lands.
- Dubstep BPM: a half time pattern and how drums and bass relate.
- Drum and bass BPM: a breakbeat example and substyle tempo references.
Why Do Genre BPM Ranges Overlap?
A tempo describes speed only, while a genre also involves rhythm, sound choices and arrangement. That is why a value such as 128 BPM sits inside both the house and techno bands here, and why a track can move outside a reference band without turning into another genre. Tempo narrows the field; it does not decide it.
Take 125 BPM. A shuffled hi hat over a four on the floor kick with a warm chord stab points toward house. The same tempo with a dry, looping percussion figure and little harmony leans toward techno. The number is identical; the drum programming and sound palette carry the label.
For production, choose a suggested tempo, program the rhythm you want and listen to how drums, bass and melody sit together. For DJ preparation, measure the actual recordings and compare phrasing as well as BPM before planning a transition. A matching number alone does not make a useful mix.
How Do Half Time and Double Time Affect Genre BPM?
Trap and dubstep often run on a fast production grid while the drums feel half as fast. In a 140 BPM half time example, the snare or clap lands on beat 3 of each bar. Count the same performance at 70 BPM, with elapsed time unchanged, and those hits fall on beats 2 and 4 across the longer bar.
That is a change in counting level. A half time drum feel can also be created at a fixed project BPM by spacing backbeats farther apart. Changing playback speed is a separate operation. The arithmetic is simple: 140 ÷ 2 = 70, and one beat stretches from 60,000 ÷ 140 = 428.6 ms to 60,000 ÷ 70 = 857.1 ms.
Drum and bass shows the reverse case: a listener may nod at 87 while the project runs at 174. A detector result at half or double the expected BPM may reflect another pulse level, but it may also be unsuitable, so check it against the recording. The half time vs double time guide covers the decision, and the half time BPM and double time BPM calculators do the conversion.
How Do You Compare a Track With These Ranges?
Measure first, then compare. Get a BPM from the recording itself, check that it follows the pulse you actually feel, and only then look up the genre band. Doing it in that order avoids the common mistake of trusting a half time reading and deciding the track belongs to a slower style.
- Measure. Tap along on Tap Tempo while the track plays, or analyze an audio file locally with the BPM Finder.
- Check the pulse level. If a dubstep track reads 70, its grid is probably 140; if a hip hop track reads 180, try 90.
- Compare with the table above, keeping in mind that bands overlap.
- Open the genre guide for substyle detail, or a tempo page such as 128 BPM, 140 BPM or 174 BPM for note durations at that exact speed.
Worked example: a DJ taps a track and gets 87. It sounds busy, with rolling breakbeats, so doubling gives 87 × 2 = 174, the suggested drum and bass starting tempo. Comparing 87 with the hip hop band would have misfiled it.
The BPM reference links every tempo tool and value page, and the BPM chart compares note times across tempos.
