150 BPM Metronome: Fast Rhythm Practice and Songs

150 BPM pulse ring: one quarter note beat lasts 400 ms
Web Audio Metronome
1
2
3
4
Beats Per Minute
60 (Largo)90 (Andante)120 (Allegro)174 (DnB)240 (Presto)
One beat = 400.0 ms | Frequency = 2.50 Hz

What Is 150 BPM?

A 150 BPM metronome gives 150 beats per minute, two and a half clicks every second, with exactly 400 milliseconds between them. On this site's chart it sits near the top of Allegro. It suits fast strumming, punk downstrokes and double kick drills, and a 75 BPM half count follows every second click.

Note durations at 150 BPM in milliseconds: quarter note, dotted eighth, eighth note and sixteenth note

How Long Is Each Note Value at 150 BPM?

150 BPM is one of the friendliest tempos for arithmetic: the quarter note is 400 ms, the eighth 200 ms, the sixteenth 100 ms and the thirty second 50 ms, all whole numbers. Only the triplet values repeat endlessly, such as the 133.33 ms eighth note triplet.

ms per quarter note = 60,000 ÷ BPM = 60,000 ÷ 150 = 400 ms

These durations take the quarter note as one beat. A fast 6/8 marked dotted quarter = 100 is exactly this tempo on a quarter note metronome, since 100 × 1.5 = 150.

Note valueBeatsDuration (ms)Hz (repeats per second)
Whole note41600.000.63
Dotted half31200.000.83
Half note2800.001.25
Half note triplet4/3533.331.88
Dotted quarter1.5600.001.67
Quarter note1400.002.50
Dotted eighth0.75300.003.33
Quarter note triplet2/3266.673.75
Eighth note0.5200.005.00
Dotted sixteenth0.375150.006.67
Eighth note triplet1/3133.337.50
Sixteenth note0.25100.0010.00
Sixteenth note triplet1/666.6715.00
Thirty second note0.12550.0020.00
Thirty second triplet1/1233.3330.00
Sixty fourth note0.062525.0040.00
Hz = BPM ÷ 60 × notes per beat. Worked example: 150 ÷ 60 × 4 = 10 Hz, so sixteenths at this tempo repeat ten times a second.

Sample counts are clean too. One beat is exactly 17,640 samples at 44.1 kHz and exactly 19,200 at 48 kHz; a 4/4 bar is 70,560 and 76,800. That makes 150 a convenient test tempo when checking whether an editor's grid matches a rendered file. The BPM to samples converter covers other rates, and the note duration calculator gives values beyond this table.

How Long Are Bars and Phrases at 150 BPM?

One 4/4 bar at 150 BPM takes 1.6 seconds, a 3/4 bar 1.2 seconds, and a 32 bar section 51.2 seconds. Because the beat is a round 400 ms, these lengths come out as short decimals that are easy to check in your head.

Bars4/43/4, or 6/8 with quarter = 1506/8 with dotted quarter = 150
11.6 s1.2 s0.8 s
46.4 s4.8 s3.2 s
812.8 s9.6 s6.4 s
1625.6 s19.2 s12.8 s
3251.2 s38.4 s25.6 s
seconds = bars × beats per bar × 60 ÷ BPM. Worked example: 8 × 3 × 60 ÷ 150 = 9.6 s for eight bars of 3/4.

The two 6/8 columns exist because a fast 6/8 is usually felt in two dotted quarter beats. On this site's metronome, x/8 meters read BPM as quarter notes and click every eighth, so a score marked dotted quarter equals 150 needs 225 (150 × 1.5). Details are in time signatures and BPM.

A three minute stretch at 150 holds 450 beats, 112.5 bars of 4/4. A dancer's eight count passes every 3.2 seconds.

Production values at 150 BPM: dotted eighth delay time, quarter note LFO rate, samples per beat at 44.1 kHz and the length of one 4/4 bar

What Tempo Marking Is 150 BPM?

150 BPM is labeled Allegro on this site's tempo chart, near the upper end of its roughly 120 to 156 BPM band. Other references place the top of Allegro elsewhere, so treat the band as approximate. Where a score prints a number and note symbol, play that number.

Just 6 BPM higher, the chart moves into Vivace, which it places at 156 to 176. Bands overlap in practice, and the tempo markings BPM chart shows all of them together.

What Does 150 BPM Feel Like to Play?

At 150 BPM the beat arrives fast enough that you stop counting each click and start feeling pairs. Sixteenths land every 100 ms, which is right at the edge where steady alternate picking or single stroke rolls demand relaxed, efficient motion.

Try a punk guitar exercise: straight eighth note downstrokes on one chord, 200 ms apart, for four bars of 4/4. Then try a double kick pattern of steady sixteenths for one bar and rest for one. Afterward, count only every second click to hear the same passage against a 75 BPM pulse. Neither exercise defines a genre or describes a recording's original grid.

150 BPM also sits inside this site's approximate trap band of 130 to 160 BPM, while the approximate rock reference range is 100 to 150 BPM, so a rock song at 150 sits right at its fast edge. See the rock BPM guide and trap BPM guide for context.

How Do You Build Up to a 150 BPM Metronome?

Climb in small steps from a tempo you can already play cleanly, then overshoot slightly before settling on 150. The final step back down usually feels roomier than it did on the way up, which is the point of the exercise.

  1. 130 BPM, quarter note click, four clean passes (about 461.54 ms per beat).
  2. 140 BPM, same passage (about 428.57 ms per beat).
  3. 145 BPM, click on eighths (about 206.90 ms per gap).
  4. 150 BPM, click on eighths, then quarters with the subdivisions kept silently.
  5. 155 BPM overshoot (about 387.10 ms per beat), then return to 150.

The online metronome covers 20 to 360 BPM with 4 subdivisions, 5 sounds, an accent on beat 1 only and a speed trainer that can step the tempo for you. To confirm that a recording really sits at 150, tap along on the tap tempo page using the spacebar or a letter or number key; it averages the last 8 gaps, ignores outliers, and starts fresh after a 2.5 second pause.

Which Songs Are Reported at 150 BPM?

Linked databases report Mac DeMarco's "Heart to Heart" and Shawn Mendes' "Stitches" at 150 BPM. Florence + The Machine's "Dog Days Are Over" shows 150 on SongBPM but 76 on GetSongBPM. These are attributed reports from the linked entries, not independent audio measurements.

The linked databases report the tempos below. Nearby matches and alternative counts are labeled separately. Use the named version where one is given; a counting option does not establish the recording's intended feel.

SongArtistRecording versionReported BPMCounting optionSources
Heart to HeartMac DeMarcoHere Comes The Cowboy150150 BPM countSongData
StitchesShawn MendesVersion unspecified150150 BPM countSongBPM
Dog Days Are OverFlorence + The MachineVersion unspecified150 (SongBPM); 76 (GetSongBPM)Conflicting estimates; 76 is not an exact half of 150SongBPM, GetSongBPM

Why does 76 matter? An exact half count would be 75. Over three minutes, 76 BPM gives 228 beats against 225 at 75, so the two readings drift apart by three beats. Treat that as a genuine disagreement, and tap the section yourself. Why BPM detectors disagree covers the usual causes.

How Do Producers Use 150 BPM?

Delay times at 150 BPM are round: 200 ms for an eighth, 300 ms for a dotted eighth, 400 ms for a quarter. A sixty fourth gives a 25 ms reverb pre delay to start from. Typed values match synced ones exactly, except for triplets.

Compare the 200 ms and 300 ms delays on the same guitar or vocal part with feedback held constant, so the only change you hear is where the repeats land. The delay calculator and reverb calculator set the options side by side.

Scenario: a producer in Ableton Live or Pro Tools builds a fast pop punk demo at 150. A tremolo or filter LFO synced to sixteenths cycles at 10 Hz; set it to eighth note triplets and it runs at 7.5 Hz. A sidechain release of one eighth, 200 ms, lets the bass recover before the next eighth note. The BPM to Hz tool converts any other synced rate.

What Are Half Time and Double Time at 150 BPM?

Half time of 150 BPM is 75 BPM, with 800 ms per counted beat. Double time is 300 BPM, with 200 ms per counted beat. You can count either pulse over the same recording without changing its playback speed.

A slower half time groove or a driving double time feel needs different drum placement and accents, not only a different count. Counting at 75 also does not, on its own, make a track halftime drum and bass. Use the half time calculator and double time calculator for numbers, and the half time vs double time guide for the musical distinction.

What Mistakes Do People Make at 150 BPM?

The common errors are rushing because the clicks feel crowded, rounding triplet delays, entering 150 for a 6/8 dotted quarter mark, and trusting a single database reading. Each has a simple numeric check.

  • Rushing ahead of the click. Switch the subdivision to eighths; a 200 ms gap shows early hits far more clearly than a 400 ms one.
  • Rounding triplets. Typing 133 ms for an eighth note triplet runs 0.33 ms early per repeat, about 4 ms after 12 repeats. Use sync.
  • Misreading compound meter. Dotted quarter equals 150 means 225 on a quarter note metronome.
  • Taking 76 as the half of 150. It is a separate estimate; the true half is 75.

Frequently Asked Questions

Keep exploring

Recommended Next Tool

BPM to MS Calculator

See note lengths in milliseconds at 150 BPM.

Open BPM to MS Calculator